Home | 로그인 | 회원가입 | 사이트맵






     
 
 
제품소개
DSP
PowerPC
ARM & Xscale
Pentium Processor
MIPS Core
I2C/SPI/USB/MDIO
Memory Tester
Test & Measurement
 
 
 
HOME > 제품소개
제품 [Emulator] Blackhawk XDS560v2 STM Emulator (TMDSEMU560v2STM-UE)

Descript-xion

The XDS560v2 design includes both high-speed USB 2.0 and 10/100Mbit Ethernet host interfaces, multi-color state and activity LEDs and a flexible, ribbon-ized coax JTAG cable. Along with traditional JTAG (IEEE 1149.1) the XDS560v2 adds support for IEEE 1149.7 (previously known as cJTAG) and System Trace (STM), an interface on the TI heterogeneous multi-core (ARM + DSP) devices. If you are familiar with the Blackhawk USB560 or LAN560 products, you will already be familiar with this new emulator design.

As with our LAN560 product, the Ethernet connection of the BH560v2 allows developers share access to target boards without the need of another computer. Migrating from a LAN560 to the Blackhawk XDS560v2 is easy.

The IEEE 1149.7 standard is a superset of IEEE 1149.1 that has been used for more than 20 years. IEEE 1149.7 adds more functionality while mainting backwards compatiblity to IEEE 1149.1. The benefits of IEEE 1149.7 include, but are not limited to, debug control of power consumption, testing a single device in a multi-device system, introduction of star topology, and two-pin operation.

The System Trace capability is compliant to MIPI STP. All Blackhawk XDS560v2-class emulators support STM. For those that are not familiar, MIPI STP expands to Mobile Industry Processor Interface System Trace Protocol. See www.mipi.org for more details. Access to this capability is provided by TI CTools enabled devices for debug and optimization of multi-core processors. This helps users look at the synchronization and timing between cores and on-chip peripherals in their application. For more information on the CTools, please refer to the TI Wiki site at: http://processors.wiki.ti.com/index.php/CTools.

The BH560v2 meets all of the TI reference design features and requirements and extends (improves) capabilities by offering the Enhanced Features listed below. This includes items such as USB bus-powered operation, Power over Ethernet capability, and additional LED indicators all arranged for easy viewing during debug. 

Features

 - USB, Ethernet (PoE) or External power supply
 - Graphical Configuration and Diagnostic Tool
 - (10) Multi-color LED Indicators for State and Activity
Auto-Adaptive Test Clock (TCK) - up to 50 MHz
Auto -compensating Calibration - for edge jitter, channel skew and duty cycle
High-Speed USB 2.0 (480Mb/s) - Host Interface
System Trace Support 1 - 1-4 pin System Trace with 128 MByte Buffer
Supports IEEE 1149.1 and IEEE 1149.7 - IEEE 1149.7 is a superset of IEEE 1149.1
Auto-sensing target voltage - Range from 1.2 to 4.1 volts
100MHz Export Clock - compliant to MIPI STP
Adaptive receiver for setup/hold times - up to 1.5ns
RoHS Compliant
10/100Mb Ehternet (LAN) - Host Interface
1  All Blackhawk XDS560-class Emulators Support System Trace

Operating System Compatibility

Windows® XP/Vista/7/8/10 (32 and 64-bit)
Windows® 2003 Server (32 and 64-bit)
Linux - Ubuntu, Fedora, RedHat, etc. (32 and 64-bit)

Development Environments

Code Composer Studio v10 (eclipse)
Code Composer Studio v6 (eclipse)
Code Composer Studio v9 (eclipse)
Code Composer Studio v5 (eclipse)
Code Composer Studio v8 (eclipse)
Code Composer Studio v4 (eclipse) - v4.2 and later
Code Composer Studio v7 (eclipse)

TI Device Support

Jacinto™ Automotive Processors
Sitara™ ARM® Cortex®-A Processors
OMAP™ Application Processors
AWRx Automotive mmWave sensors
DaVinci™ Video Processors
C6000™ High Performance DSPs
C6000™ DSP + ARM® Family
C66x™ Multi-Core DSPs
C5000™ Low Power DSPs
C28xxx Digital Control Processors
ARM® Cortex™ A / R / M Microprocessors
ARM® 9 / 11 Microprocessors
Stellaris™